Please support Friends of the Bees to keep this forum free to use.

Natural Beekeeping International Forum
low-cost, low-impact, balanced beekeeping for everyone

 Forum FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileYour Profile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Please Read The Rules before posting.



(country selected automatically - UK/USA/CA/AU)
BBCode Guide
Introduction
What is BBCode?

Text Formatting
How to create bold, italic and underlined text
How to change the text colour or size
Can I combine formatting tags?

Quoting and outputting fixed-width text
Quoting text in replies
Outputting code or fixed width data

Generating lists
Creating an Un-ordered list
Creating an Ordered list

Creating Links
Linking to another site

Showing images in posts
Adding an image to a post

Other matters
Can I add my own tags?

 

Introduction
What is BBCode?
BBCode is a special implementation of HTML. Whether you can actually use BBCode in your posts on the forum is determined by the administrator. In addition, you can disable BBCode on a per post basis via the posting form. BBCode itself is similar in style to HTML: tags are enclosed in square braces [ and ] rather than < and > and it offers greater control over what and how something is displayed. Depending on the template you are using you may find adding BBCode to your posts is made much easier through a clickable interface above the message area on the posting form. Even with this you may find the following guide useful.
Back to top

Text Formatting
How to create bold, italic and underlined text
BBCode includes tags to allow you to quickly change the basic style of your text. This is achieved in the following ways:
  • To make a piece of text bold enclose it in [b][/b], eg.

    [b]Hello[/b]

    will become Hello
  • For underlining use [u][/u], for example:

    [u]Good Morning[/u]

    becomes Good Morning
  • To italicise text use [i][/i], eg.

    This is [i]Great![/i]

    would give This is Great!

Back to top
How to change the text colour or size
To alter the color or size of your text the following tags can be used. Keep in mind that how the output appears will depend on the viewers browser and system:
  • Changing the colour of text is achieved by wrapping it in [color=][/color]. You can specify either a recognised colour name (eg. red, blue, yellow, etc.) or the hexadecimal triplet alternative, eg. #FFFFFF, #000000. For example, to create red text you could use:

    [color=red]Hello![/color]

    or

    [color=#FF0000]Hello![/color]

    will both output Hello!
  • Changing the text size is achieved in a similar way using [size=][/size]. This tag is dependent on the template you are using but the recommended format is a numerical value representing the text size in pixels, starting at 1 (so tiny you will not see it) through to 29 (very large). For example:

    [size=9]SMALL[/size]

    will generally be SMALL

    whereas:

    [size=24]HUGE![/size]

    will be HUGE!

Back to top
Can I combine formatting tags?
Yes, of course you can; for example to get someones attention you may write:

[size=18][color=red][b]LOOK AT ME![/b][/color][/size]

this would output LOOK AT ME!

We don't recommend you output lots of text that looks like this, though! Remember that it is up to you, the poster, to ensure that tags are closed correctly. For example, the following is incorrect:

[b][u]This is wrong[/b][/u]
Back to top

Quoting and outputting fixed-width text
Quoting text in replies
There are two ways you can quote text: with a reference or without.
  • When you utilise the Quote function to reply to a post on the board you should notice that the post text is added to the message window enclosed in a [quote=""][/quote] block. This method allows you to quote with a reference to a person or whatever else you choose to put. For example, to quote a piece of text Mr. Blobby wrote, you would enter:

    [quote="Mr. Blobby"]The text Mr. Blobby wrote would go here[/quote]

    The resulting output will automatically add: Mr. Blobby wrote: before the actual text. Remember that you must include the quotation marks "" around the name you are quoting -- they are not optional.
  • The second method allows you to blindly quote something. To utilise this enclose the text in [quote][/quote] tags. When you view the message it will simply show: Quote: before the text itself.

Back to top
Outputting code or fixed width data
If you want to output a piece of code or in fact anything that requires a fixed width with a Courier-type font, you should enclose the text in [code][/code] tags, eg.

[code]echo "This is some code";[/code]

All formatting used within [code][/code] tags is retained when you later view it.
Back to top

Generating lists
Creating an Un-ordered list
BBCode supports two types of lists, unordered and ordered. They are essentially the same as their HTML equivalents. An unordered list ouputs each item in your list sequentially one after the other indenting each with a bullet character. To create an unordered list you use [list][/list] and define each item within the list using [*]. For example, to list your favorite colours you could use:

[list]
[*]Red
[*]Blue
[*]Yellow
[/list]

This would generate the following list:
  • Red
  • Blue
  • Yellow

Back to top
Creating an Ordered list
The second type of list, an ordered list gives you control over what is output before each item. To create an ordered list you use [list=1][/list] to create a numbered list or alternatively [list=a][/list] for an alphabetical list. As with the unordered list items are specified using [*]. For example:

[list=1]
[*]Go to the shops
[*]Buy a new computer
[*]Swear at computer when it crashes
[/list]

will generate the following:
  1. Go to the shops
  2. Buy a new computer
  3. Swear at computer when it crashes
Whereas for an alphabetical list you would use:

[list=a]
[*]The first possible answer
[*]The second possible answer
[*]The third possible answer
[/list]

giving
  1. The first possible answer
  2. The second possible answer
  3. The third possible answer

Back to top

Creating Links
Linking to another site
phpBB BBCode supports a number of ways of creating URIs, Uniform Resource Indicators better known as URLs.
  • The first of these uses the [url=][/url] tag; whatever you type after the = sign will cause the contents of that tag to act as a URL. For example, to link to phpBB.com you could use:

    [url=http://www.phpbb.com/]Visit phpBB![/url]

    This would generate the following link, Visit phpBB! You will notice the link opens in a new window so the user can continue browsing the forums if they wish.
  • If you want the URL itself displayed as the link you can do this by simply using:

    [url]http://www.phpbb.com/[/url]

    This would generate the following link: http://www.phpbb.com/
  • Additionally phpBB features something called Magic Linkswhich will turn any syntatically correct URL into a link without you needing to specify any tags or even the leading http://. For example typing www.phpbb.com into your message will automatically lead to www.phpbb.com being output when you view the message.
  • The same thing applies equally to email addresses; you can either specify an address explicitly, like:

    [email]no.one@domain.adr[/email]

    which will output no.one@domain.adr or you can just type no.one@domain.adr into your message and it will be automatically converted when you view.
As with all the BBCode tags you can wrap URLs around any of the other tags such as [img][/img] (see next entry), [b][/b], etc. As with the formatting tags it is up to you to ensure the correct open and close order is following. For example:

[url=http://www.phpbb.com/][img]http://www.phpbb.com/images/phplogo.gif[/url][/img]

is not correct which may lead to your post being deleted so take care.
Back to top

Showing images in posts
Adding an image to a post
phpBB BBCode incorporates a tag for including images in your posts. Two very important things to remember when using this tag are: many users do not appreciate lots of images being shown in posts and second, the image you display must already be available on the Internet (it cannot exist only on your computer, for example, unless you run a webserver!). There is currently no way of storing images locally with phpBB (all these issues are expected to be addressed in the next release of phpBB). To display an image, you must surround the URL pointing to the image with [img][/img] tags. For example:

[img]http://www.phpbb.com/images/phplogo.gif[/img]

As noted in the URL section above you can wrap an image in a [url][/url] tag if you wish, eg.

[url=http://www.phpbb.com/][img]http://www.phpbb.com/images/phplogo.gif[/img][/url]

would generate:



Back to top

Other matters
Can I add my own tags?
No, I am afraid not directly in phpBB 2.0. We are looking at offering customisable BBCode tags for the next major version.
Back to top

All times are GMT

Jump to:  
biobees home |  how to start beekeeping for free |  top bar hive plans |  UK courses |  books |  barefoot beekeeper blog |  black bees |  podcast |  articles |  world beekeeping news |  videos |  iTunes App |  Android APP |  contact

SPECIAL OFFER FOR UK FORUM MEMBERS - Buy your protective clothing here and get a special 15% discount! (use the code BAREFOOTBEEKEEPER at checkout and be sure to 'update basket')



Are the big energy companies bleeding you dry?


Is way too much of your hard-earned family income going up in smoke?

Are you worried about what could happen if the ageing grid system fails?

You need to watch this short video NOW to find out how YOU can cut your energy bills TO THE BONE within 30 days!

WATCH THE VIDEO NOW



(country selected automatically - UK/USA/CA/AU)

Conserving wild bees

Research suggests that bumble bee boxes have a very low success rate in actually attracting bees into them. We find that if you create an environment where first of all you can attract mice inside, such as a pile of stones, a drystone wall, paving slabs with intentionally made cavities underneath, this will increase the success rate.

Most bumble bee species need a dry space about the size a football, with a narrow entrance tunnel approximately 2cm in diameter and 20 cm long. Most species nest underground along the base of a linear feature such as a hedge or wall. Sites need to be sheltered and out of direct sunlight.

There is a spectacular display of wild bee hotels here

More about bumblebees and solitary bees here

Information about the Tree Bumblebee (Bombus hypnorum)

Barefoot Beekeeper Podcast



Now available from Lulu.com


Now available from Lulu.com


Now available from Lulu.com


4th Edition paperback now available from Lulu.com

See beekeeping books for details and links to ebook versions.
site map
php. BB © 2001, 2005 php. BB Group

BBCode Guide - Natural Beekeeping Network Forum